Dayton Fan 1VCE9 30” 1/2 HP 115V 2 Speed 9704/8712 Hi/Low CFM New
Air Circulator, Industrial Non-Oscillating, Propeller Dia 30 In, CFM Low 8712, CFM High 9704, Sones @ 0000-In SP @ 5 Ft 32, 115 Voltage, 60 Hz, 1 Phase, Operating Amps 3.7/3.1, Motor Type Permanent Split Capacitor, Motor HP 1/2, Motor RPM 1075/750, Number of Blades 3, Mounting Location Wall, Ceiling, Pedestal, or I-Beam, Max Ambient Temp 104 F, Width 33 In, Height 33 In, Max Depth 14 1/4 In, Cord Length 10 Ft, , Requires Mounting Device, Includes Mounting Bolts
Industrial Assembled 2-Speed Air Circulator Head Engineered to cool workers in the most demanding environments. Pull chain switch for easy operation. Circulator head secures to mounting accessory (not included) with 2 bolts (included); locking tilt adjustment directs air where it's needed. Corrosion-resistant aluminum propellers. Units include factory-wired, 10-ft., 3-cond. power cord with grounded, molded plug. Recommended mounting accessories sold separately. UL and C-UL Listed.Totally enclosed motorsBall bearingsPreassembledOSHA-compliant gray polyester powder-coated wire guard.
This is a Dayton stationary non-oscillatiing air circulator with a blade diameter of 30 inches. The circulator has two speeds and is single phase. The unit also has a voltage of 115 and the cfm when high is 9704 and the cfm when low is 8712. The motor has 1/2 horsepower and the motor has an rpm of 1075/750. The ideal mounting locations for this item are for either a wall, ceiling, pedestal or IBeam. The operating amps are 3.7/3.12 and the unit has 60 hertz along with 350 watts. The motor type is permanent split capacitor and the drive type is direct. It has a totally enclosed air-over motor enclosure and the motor insulation class is B. The thermal protection is automatic and the bearing type is ball. The outside diameter is 33 inches with the height being 33 inches and the width being 33 inches. The maximum depth is 13-1/4 inches and the cord length is 10 feet. The sound level is 78 decibels and the maximum ambient temperature is 104 degrees Fahrenheit. This unit has three blades and the blade material is a mill finish aluminum. The shaft diameter is 1/2 of an inch and the housing and guard material is steel. The wire guard finish is gray polyester powder coat and the application is spot cooling and people cooling.
I have inspected this item and have found that the fan guard is dented in various places. I tested this item to confirm these dents don’t affect the functionality. Please view the picture for further details on this item.
I am aware of the imperfections of this item and have priced it accordingly.
Item: Air Circulator
Blade Dia.: 30"
CFM High: 9704
CFM Low: 8712
Air Velocity (FPM) @ 20 Ft.: 750/700
Motor HP: 1/2
Motor RPM: 1075/750
Operating Amps: 3.7/3.12
Mounting Location: Wall, Ceiling, Pedestal or IBeam
Fan RPM: 1075
Environmental: Applications: Industrial
Air Velocity (FPM) @ 10 Ft.: 1190/1110
Air Velocity (FPM) @ 40 Ft.: 310/290
Air Velocity (FPM) @ 60 Ft.: 180/170
Sound Level: 78dBA
Max. Ambient Temp.: 104 Degrees F
Motor Type: Permanent Split Capacitor
Drive Type: Direct
Motor Enclosure: Totally Enclosed Air-Over
Motor Insulation: Class B
Thermal Protection: Auto
Bearing Type: Ball
Outside Dia.: 33"
Max. Depth: 13-1/4"
Cord Length: 10 ft.
Number of Blades: 3
Blade Material: Mill Finish Aluminum
Shaft Dia.: 1/2"
Housing Material: Steel
Guard Material: Steel
Wire Guard Finish: Gray Polyester Powder Coat
Weight: 54 LBS
Standards: UL, cUL, OSHA
Delivery/Shipping available at additional cost to Buyer, dlb PayPal Accepted.